SOLIDified Solid Chemistry.
Consistent boiler, cooling, and closed-loop treatment without the drums, hazmat, and spills of liquid chemicals.
End the Drums, Hazmat, and Spills
A traditional liquid program means drum storage, handling hazards, freight on diluted product, and dosing that drifts. SOLIDified solid chemistry, fed through AP Tech feeders, fixes all four. The active chemistry is the same, now in solid form.
-
Hazardous Liquid Handling
Concentrated liquids mean PPE, spill risk, and exposure for the people in your chemical room.
-
Drums, Storage & Freight
Liquid programs fill the chemical room and the loading dock, and you pay freight to ship water.
-
Inconsistent Dilution
Hand-mixed or drifting feed rates give you treatment that wanders out of range.
How SOLIDified Works
The same four steps on every cooling, boiler, and closed-loop program.
Solid Concentrate
Proven cooling, boiler, and closed-loop chemistry, pressed into a solid, not a drum of diluted liquid.
Dissolved On Site
Patented dissolving equipment turns the solid into treated water at a controlled rate.
Precise, Steady Dose
The same dose every cycle, without anyone hand-mixing a drum.
Protected Systems
Boilers, cooling towers, and closed loops stay in range and protected.
Safer to Handle and Steadier to Run.
The same treatment results, without the liquid chemicals sitting in your plant.
No Hazardous Liquid Handling
The concentrated liquids, the spill kits, and most of the PPE leave with the drums. Your team handles a solid instead of a hazard.
Consistent Dosing
The feeder dissolves product at a controlled rate, so treatment holds steady instead of swinging with hand-mixed batches.
Less Storage, No Drum Freight
Solids take a fraction of the space, and you stop paying to ship and store water.
Safer Team, Easier Audits
Fewer hazards in the chemical room means a shorter SDS binder and a simpler walkthrough when an auditor shows up.
AP Tech Feeders & Passivation Solids
We run AP Tech Ultra-M solid feeders and passivation solids. Partner contact for solids: Matt Haikalis, CWT at AP Tech.
Boiler, Cooling & Closed-Loop
Solid programs for steam, cooling towers, and closed loops, matched to the chemistry each system needs.
Straight From the Job Site
Doug documents the work as it happens. A couple of recent solid-chemistry jobs:
“We installed a nice SOLIDified system today. They will no longer need to be handling hazardous liquids.”
Doug Hoffman · from the job site
“These older feeders are obsolete. Get with AP Tech and upgrade to the Ultra-M.”
Doug Hoffman · from the job site
AP Tech Feeders, Built for Solids
We run AP Tech solid feeders. The Ultra-M dissolves solid product into your makeup or treated water at a controlled rate, so the dose holds steady without anyone mixing a drum.
We also use passivation solids for new condensers and startups. If your feeders are older or obsolete, we coordinate the upgrade with AP Tech. Partner contact for solids: Matt Haikalis, CWT.
-
Ultra-M Solid Feeders
Controlled, repeatable dosing for boiler, cooling, and closed-loop programs.
-
Passivation Solids
Clean passivation for new condensers and system startups.
-
Feeder Upgrades & Retrofits
We replace obsolete feeders and set up the conversion end to end.
Get the details in writing:
Why Solid Chemistry Wins
Solid chemistry packs proven cooling tower, boiler, and closed-loop treatment into a solid concentrate. It ships in a low-carbon-footprint profile and dissolves into a precise dose on site, so you get a well-run program without the hazard and waste of liquid drums.
Safety
- Removes the risk of discharging hazardous liquid chemicals during shipment, storage, or application.
- Improves operator safety by reducing exposure to hazardous chemicals.
- Eliminates dangerous odors and fumes.
- Safer, cleaner mechanical rooms from a smaller footprint.
Sustainability
- A 44-lb case of solids replaces 500-lb, 55-gallon liquid drums and the extra diesel they burn.
- Fully recyclable containers.
- Avoids the sodium hydroxide that liquid programs use for pH control, a corrosive, energy-intensive additive.
Economic
- Maximizes utility efficiency and equipment life by controlling corrosion, scale, and microbiological fouling.
- Saves water by skipping drum triple-rinsing and running higher cycles of concentration.
- Cuts costs tied to chemical-exposure health issues and drum-handling injuries.
- Eliminates eye-wash station installation and maintenance.
Ready to get the liquids out of your plant?
We'll look at what you feed now and lay out the solid-chemistry conversion, feeders included.
Common Questions
Talk to Doug about a solid-chemistry conversion.
Boiler, cooling tower, or closed-loop. We'll handle the chemistry, the feeders, and the switch.