Industrial Water Treatment · Ohio

Cooling Tower Water Treatment.

Scale, corrosion, and microbiological control for cooling towers and condensers, with passivation and automated chemical feed.

Schedule Complimentary Plant Survey Call 24/7: (937) 508-8739
Chemical Engineer-Led · Since 1998
Industrial & Commercial clients across Ohio
AP Tech · Advantage Controls partners
American-Owned & Operated · Urbana, Ohio
Condenser passivation with SOLIDified solids and acid feed by Hoffman Water
Cooling Tower Treatment

Open Towers Concentrate Whatever Is in the Water

An open recirculating tower concentrates whatever is in the makeup water. Hardness scales the fill and the tubes, the warm wet environment grows bacteria and biofilm, and the metal corrodes. Left alone, a tower loses efficiency and fouls the condenser.

We treat scale, corrosion, and biology together, with a program matched to your water and your cycles of concentration, plus automated feed so it holds between service visits.

“Time for condenser passivation. Does it matter? YES.”
Doug Hoffman, President & Founder
The Cooling Loop

How a Treated Tower Runs

Warm water to the tower, cool water to the plant, with scale, corrosion, and bacteria held in check.

Warm return Cold supply Cooling Tower Evaporates heat Condenser Heat load Biocide + inhibitor Makeup Blowdown
What's Included

A Complete Cooling Program

We control scale, corrosion, and biology together, with the feed and monitoring to keep it that way.

Scale & Corrosion Inhibitors

Inhibitor programs that keep mineral scale off the fill and tubes and protect the metal in the tower, condenser, and piping.

Microbiological Control

Biocide programs and biofilm management to control bacteria and slime, and the conditions that let them take hold.

New-System & Condenser Passivation

Passivate fresh metal at startup so new tubes and surfaces build a protective film instead of corroding from the first fill.

Conductivity & Bleed Control

Conductivity and bleed control with makeup management to hold cycles of concentration where they should be.

Automated Feed & Remote Monitoring

Automated chemical feed with Walchem controllers and remote monitoring so the program holds between visits.

SOLIDified Solid Chemistry

Run the tower on SOLIDified solid chemistry and drop the hazardous liquid drums, handling, and spill risk.

Routine Service & Testing

Regular service and water testing using AquaPhoenix test methods to catch drift before it becomes a problem.

See how SOLIDified solid chemistry works →
Programs & Products

The Cooling Products We Run

Matched to your water, your metallurgy, and your cycles of concentration.

  • Corrosion & Deposition Programs

    Inhibitor and deposition-control programs matched to your tower's water, metallurgy, and operating conditions. We design for the system in front of us, not a generic dosing chart.

  • EPA-Registered Biocides, Oxidizing and Non-Oxidizing

    We run both oxidizing and non-oxidizing biocides, all EPA-registered, and rotate them so bacteria and biofilm don't settle into one chemistry. We match the program to your tower's bioload and conditions.

  • Start-Up & Pre-Treatment

    Start-up products for new towers: pre-treatment to clean the system, then passivation so fresh metal builds a protective film from the first fill.

  • Off-Line & On-Line System Cleanup

    Cleanup for organic or inorganic fouling, run off-line or on-line. When a tower gets away from you, we pull the scale, mud, and biofilm back out and reset the program.

Circulating pumps, piping, and water-treatment controls in an Ohio plant mechanical room, serviced by Hoffman Water
In the Field

Treatment That Fits Your Plant

We install and service cooling and process water treatment on site across Ohio facilities.

Cooling system service by Hoffman Water.

Schedule a complimentary plant survey →

Losing tower efficiency to scale or biofilm?

We'll come to your facility, test the tower water, and show you what's happening in the system, at no charge.

Schedule Complimentary Plant Survey Call 24/7: (937) 508-8739
FAQ

Cooling Tower Treatment Questions

Fresh metal needs to build a stable protective film before it goes into normal service. Skip passivation and the new tubes and surfaces start corroding from the first fill. Passivation at startup protects the metal you just paid for.
Bacteria and biofilm thrive in warm, stagnant tower water. We control them with a biocide program, biofilm management, and good system housekeeping, backed by routine testing. Keeping conditions hostile to growth takes steady service, not a one-time treatment.
Both work. Solid chemistry, our SOLIDified program, gives you consistent dosing without drums of liquid to store, handle, and spill. For many facilities that is a safer, simpler way to run the tower.
Yes. We set up automated chemical feed and controls with Walchem and remote monitoring, so conductivity, bleed, and feed stay on target between service visits, and we still come out and test.
Look at what a service visit actually includes. A real program tests the water on site, checks bleed and feed against targets, documents the results, and adjusts the chemistry, not just tops off a drum. Then ask about microbiological control, because scale is only half the fight. At Hoffman Water a chemical engineer runs the account, and we treat towers and condensers across Ohio and the bordering states.
Get Started

Get Your Cooling System Under Control

We'll test the water, walk the system, and give you a straight recommendation for scale, corrosion, and microbiological control.

Schedule Complimentary Plant Survey Call 24/7: (937) 508-8739
Call 24/7 Free Survey